Glass lined vertical storage tank manufacturer

The sealing failure of mechanical punch press mainly refers to the failure caused by factors such as corrosion,wear,equipment,heat loss,and operation.After disassembling the mechanical seal of the kettle,there were no scratches or wear on the sealing surface,eliminating the cause of physical damage to the sealing surface.Considering the presence of a large amount of crystals and scale inside the sealed chamber of the reaction vessel,combined with various manifestations of mechanical seal failure,it is determined that the crystallinity and corrosiveness of the transported medium are the main causes of seal failure.The common corrosion of reaction vessels is the corrosion of the contact parts with auxiliary sealing rings,mechanical seal dynamic rings,static rings,shaft sleeves,and static ring seats.Some corrosive materials can also cause special corrosion to metal shaft sleeves,dynamic rings,static ring seats,and sealing bodies. 

What is the difference between a glass lined vertical storage tank and a stainless steel reactor?Let's introduce the glass lined vertical storage tank manufacturer:
At the material level,the vertical glass lined storage tank is baked at high temperature with silicon containing glaze,forming a dense glaze layer on the metal surface;The stainless steel reactor is made of stainless steel,and the acid resistance of the glaze lining in the reactor is relatively stronger than that of the stainless steel reactor.In terms of heat transfer,stainless steel has a better heat transfer effect than reaction vessels.Under the same heating or warming conditions,the heating or warming of the reaction kettle is slower than that of stainless steel.In terms of cost,the price of the reactor is much cheaper.At the same volume,stainless steel reactors are more expensive,but their weight is lighter than that of reactors.In terms of pressure resistance,mechanical punch press can withstand lower working pressures,while stainless steel reactors can withstand higher pressures.Therefore,under acidic conditions,mechanical punch press can be used,and stainless steel reaction vessels can be used under working pressure.
The main reason for corrosion of mechanical punch press is caused by the crystals inside,so it is important to pay attention to the timing when using them.If impurities only affect its performance during long-term operation,it is recommended that everyone carefully inspect the equipment before use to avoid unnecessary trouble in the future.