Enamel Glass Disc Condenser factory

Although the performance conditions of the enamel glass disc condenser are very good and can be contacted by so many media,it does not mean that all media can be contacted.There are always some media that need less exposure,otherwise it will affect the mixer,so the enamel glass disc condenser factory tells everyone to be more careful when using it.So what are these media?
1.Alkaline media or materials with a pH value greater than 12 and a temperature higher than 80°C;
2.Phosphoric acid medium or material with a concentration greater than 30%and a temperature greater than 180℃;
3.Hydrofluoric acid and media or materials containing fluoride ions at any concentration and temperature;
4.The alternating reaction process of acid and alkali substances in enamel glass disc condenser;
5.When the temperature of the enamel glass disc condenser changes dramatically,excessive stress can cause the porcelain to explode and damage the enamel equipment.Therefore,during use,the temperature should be slowly increased or decreased to prevent cold and heat accumulation.
So be careful when using enamel reaction vessels.Some media can have a certain impact on the mixer and even shorten its service life.At the same time,it is reminded that when using a mixer,the correct method must be used to ensure the normal operation of the enamel glass disc condenser.