Glass-lined agitator manufacturer

The precautions for using a glass-lined agitator are crucial for ensuring its normal operation, extending its service life, and ensuring operational safety. The following are some detailed usage precautions compiled by glass-lined agitator manufacturers:
1、 First use inspection
Before using the glass-lined agitator for the first time, it is necessary to carefully read the instrument manual and check whether the accessories included in the instrument are complete, such as the stirrer and power cord, according to the manual. Check whether the equipment itself is intact, especially whether there are cracks or damage on the enamel surface, to ensure that the equipment is in good condition.
2、 Safety operation standards

The power supply of the glass-lined agitator should be connected correctly, the circuit should be safe, and sufficient current supply should be ensured to prevent the mixer from overheating due to overload. When using, try to connect the ground wire as much as possible to ensure electrical safety during operation. When the mixer is working, the operator should stand in a safe position and avoid direct contact with rotating parts such as the mixing shaft and blades.

3、 Precautions for mixing operation
When adjusting speed, it should be gradually adjusted from low speed to high speed to avoid direct starting from high speed, which may cause the mixer to be asynchronous or jump. During the mixing process, the operation status of the mixer should be closely observed. If the mixer is found to be jumping, uneven mixing, or abnormal equipment noise, it should be stopped immediately for inspection. When the glass-lined agitator is not stirring, it cannot be heated. When it is not working, the power should be cut off to save energy and avoid equipment overheating.
4、 Material feeding and mixing speed
When adding materials, the correct feeding sequence should be followed, usually adding liquid first and then solid powder or other materials, to avoid excessive particles obstructing the flow during the mixing process, causing uneven mixing or equipment damage. The selection of mixing speed should be determined based on the characteristics of the material. For liquids or slurries with high viscosity, the stirring speed should be appropriately reduced; For low viscosity liquids, the stirring speed can be appropriately increased to improve work efficiency.
5、 Equipment cleaning and maintenance
The glass-lined agitator should be kept clean and dry to prevent the solution from entering the machine and causing damage. Regularly use a damp cloth or soft bristled brush to clean the mixer, especially the spiral part, to prevent food residue or other impurities from contaminating it. Regularly inspect the blades, bearings, and other key components of the mixer to ensure that there are no cracks or damage, and that the sealing components are in good condition, in order to avoid production stagnation or material leakage caused by equipment failure.
6、 Other precautions
The glass-lined agitator should be installed in a stable environment to avoid vibration and drastic temperature changes. The installation location should be away from high temperature, high humidity, and highly corrosive environments to ensure the normal operation of the equipment. During use, attention should be paid to avoiding heating materials in an empty tank or adding cold materials to a hot tank. Excessive temperature differences can have a certain impact on the performance of enamel glass.
In summary, the precautions for using a glass-lined agitator cover multiple aspects such as initial use inspection, safety operation standards, mixing operation precautions, material feeding and mixing speed, equipment cleaning and maintenance, and other precautions. Following these precautions can ensure the normal operation and extended service life of the glass-lined agitator, while ensuring the safety of the operators.