China Stainless Steel Reactor

During the operation of China Stainless Steel Reactors, there may be material reactions inside, but occasional use may suddenly stop. Many times people do not know the sudden cause of the device, so they will restart the device to continue the material reaction, but in fact, they should first find the cause and suddenly stop.

1. There are rubber side walls on both sides of the stainless steel reactor. If not closed properly, the equipment will suddenly stop. In order to avoid some dangerous situations when the equipment reacts, several protective devices are usually installed on the equipment, and emergency shutdown of equipment with tight rubber sidewalls is one of the protective devices.

2. Sometimes I accidentally touch the emergency stop button. Some buttons may be accidentally pressed during operation or manually activated due to emergency situations, which may also cause the stainless steel reactor to suddenly stop. When restarting, pay attention to cleaning the inside of the device first.

3. Sometimes, when a large amount of material is placed in the equipment, it may get stuck during the reaction process, causing the equipment to suddenly stop and unable to operate normally. In order to avoid this situation as much as possible, an additional shed board will be added to the batching workshop, which can greatly reduce the possibility of materials with abnormal specifications entering.

4. When starting, it is necessary to follow the correct steps, first turn on the conveyor, and then turn on the feeding system. If this process is reversed, the device will start running with a load, which may cause the device to suddenly stop.

This issue introduces the reason for the sudden shutdown of the stainless steel reactor. In many cases, because the device has intelligent emergency stop settings, there is no need to worry about the device itself. If you want to learn more, please continue to follow us.