China Glass Lined Distillation Tank manufacturer

When we use glass lined distillation tank,we always encounter the problem of equipment corrosion.What should we do at this time?Take a look at China glass lined distillation tank manufacturer：
The introduction.
1.Cleaning the surface of glass lined distillation tank with commonly used clean water can slow down the occurrence of corrosion.However,this is not a good solution.Although protecting the enamel reaction kettle,it can also cause water pollution.The editor suggests that friends install glass lined distillation tank and then apply a resin anti-corrosion layer on the outer surface of the equipment to protect it from the beginning.If the outer surface of the equipment needs to be insulated,a layer of anti-corrosion coating should be applied first.
2.When the kettle is heated,there will be some corrosion.When the heating temperature is below 100°C,steam below atmospheric pressure can be used for heating.Within the range of 100-180°C,full steam can be used.When the temperature is high,high-pressure superheated steam can be used to alleviate corrosion to a certain extent.
3.Glass lining is a pre sintered layer of glass inside a metal pot to resist chemical corrosion.Note that enamel glass materials cannot be used for alkaline materials,as glass will be dissolved by alkali.Glass lined distillation tank can use acid and alkali.
The three measures introduced by China glass lined distillation tank manufacturers above can effectively prevent corrosion of glass lined distillation tank.When we use glass lined distillation tank,they are mainly used for medium storage reactions.During storage,corrosion may occur due to the influence of the medium or environmental factors.At this point,timely handling is necessary to reduce the harm caused by corrosion.The above three measures can effectively prevent corrosion of glass lined distillation tank.Pay attention to regular maintenance when using equipment,as this can reduce factors that can cause corrosion.