Glass Lined Mixer manufacturer

The glass lined mixer manufacturer reminds everyone to pay attention to the following matters during use to ensure its safe operation and extend its service life:
1、 Installation and Debugging

The glass lined mixer should be installed on a stable and sturdy foundation to ensure that the equipment does not shake or shift during operation. At the same time, installation should be carried out according to the installation drawings and instructions provided by the manufacturer to ensure that all components are connected correctly and securely fastened. After installation, a no-load test and a load test should be conducted to check whether the operation of the glass lined mixer is smooth, and whether there are any abnormal sounds or vibrations. At the same time, it is necessary to check whether the rotation direction of the mixing blade is correct and whether each sealing part is tight and leak free.

2、 Operation and maintenance
The operator should be familiar with the structure, performance, and working principle of the glass lined mixer, and operate it according to the operating procedures. Before starting the mixer, it should be ensured that the mixing blade is completely immersed in the liquid to avoid damage caused by idling. At the same time, the mixing speed should be controlled to avoid poor mixing effect or equipment damage caused by being too fast or too slow. Regular maintenance should be carried out on the glass lined mixer, including checking the wear and tear of various components, replacing damaged parts, cleaning the mixing blades and containers, etc. At the same time, the sealing performance of the mixer should be regularly checked to ensure that no leakage occurs. For components that require lubrication, lubricating oil or grease should be added regularly according to the manufacturer's recommendations. At the same time, effective cooling measures should be taken for mixers working in high-temperature environments to avoid equipment overheating and damage.
3、 Safety and Protection
The mixer may produce splashing or splashing liquids during operation, so necessary protective facilities such as baffles, shields, etc. should be installed to protect the personal safety of operators. The electrical part of the glass lined mixer should comply with relevant safety standards and be equipped with necessary protective devices, such as overload protection, short circuit protection, etc. At the same time, operators should be familiar with the operation methods of electrical equipment and avoid using mixers in humid or flammable environments. In case of any abnormal situation or endangering personal safety during the operation of the mixer, the emergency stop button should be immediately pressed to cut off the power and stop the equipment from running.
4、 Precautions
Before starting the glass lined mixer, an appropriate amount of liquid should be injected to avoid equipment damage caused by dry operation. At the same time, it should be ensured that the liquid always covers the stirring blade during the mixing process to avoid direct contact between the stirring blade and the bottom or side wall of the container, which may cause wear. The mixing time should be controlled according to actual needs to avoid excessive or insufficient mixing time affecting the mixing effect or causing equipment damage. At the same time, regular observation of the mixing process should be carried out, and the mixing speed and time should be adjusted in a timely manner. The mixer should avoid overloading during operation to prevent equipment damage or safety accidents. Therefore, when selecting a glass lined mixer, the appropriate model and specifications should be chosen according to actual needs, and it should be ensured that its rated load capacity is not exceeded during use.
In summary, it is necessary to pay attention to installation and commissioning, operation and maintenance, safety and protection, as well as precautions during the use of glass lined mixers. Only by strictly adhering to relevant regulations and operating procedures can the safe operation and extended service life of the mixer be ensured.